No Limitz V2 mast

( 85cm & 72cm )

After nearly two years of development, we are excited and proud to offer the foilers of the world the NoLimitz V2 foil mast.

Your mast is covered for 1-year from retail purchase against any manufacturing defects

The V2 foil mast is incompatible with front wings greater in span than 100cm or 39in.

The V2 improves upon the original V1 design in every way.

The V2 is significantly stiffer, significantly faster, and still featherlight.

Using a layup of high modulus materials and our proprietary hollow core technology, we have achieved more with less.

The result - an ultra stiff, thin and fast, featherweight mast.

The NoLimitz V2 is offered with a bonded on, dedicated aluminium adapter that fits the foil brand of your choice's fuselage.

These V2 are offered with a Takuma 3 bolt head which used with a (chosen stringy adaptor) allows multiple brands foils to be used with 1mast

TAKUMA 3 BOLT (M6)

However, if you like variety we are very happy to offer 'Stringfellow Hydrofoil solution' adapters using the V2 mast .

This is a Great option if you have a few foil brand Front wings but want them all to be based off one solid mast.

To chose this and run these Stringfellow Hydrofoil solution' adaptors The primary mast head has to be a Takuma V1 (3 x m6 bolt head)

the options for the rider are as follows :

Takuma v1 to HD Takuma v2
Takuma v1 to F-one
Takuma v1 to Axis
Takuma v1 to cabrinha
Takuma v1 to lift
Takuma v1 to Unifoil
Takuma v1 to Signature
Takuma v1 to code

All adapters are designed produced and tested in the Columbia River Gorge, USA

It’s Super Light

The NoLimitz V2 retains the V1’s title as the lightest foil mast on the market.

If you are looking to shed weight from your set up, the easiest way to do that is to replace your stock mast with the V2.

A lighter foil is easier to carry, pump, and carve. The majority of foil masts on the market get their stiffness from the thickness of their carbon walls. More thickness = more materials, and the result are stiff masts, albeit heavy in the hand.

The NoLimitz V2 gets its stiffness from the unique design of the layup of high modulus materials used in its construction.

We won’t dispute that it’s our secret sauce, and it’s the most defining characteristic of the V2 mast which separates itself from the rest. How much does the NoLimitz 78 Takuma weigh? It weighs 13 grams more than a full Nalgene.

NEW WARRANTY TERMS

As of Jan 2025, NoLimitz has adjusted their warranty and introduced a wingspan limit to the mast.

The V2 foil mast is incompatible with front wings greater in span than 100cm or 39in. If a mast failure occurs as a result of the use of a front wing greater in span than 100cm or 39in, we will not be able to warranty the mast.

Please do not use your mast with front wings greater in span than 100cm or 39in. The V2 was not designed for the bending moments that result from the use of front wings with spans greater than 100cm / 39in. Thank you for your understanding and cooperation.

Tapering Profile Width and Chord.

The V2 has a tapering profile width profile that ends at 15.5mm at the fuselage adapter, making the mast 1mm thinner than the V1. The V2 also has a chord that tapers from the top of the mast to the bottom of the mast at 118.9mm. The width profile, chord, and foil section of the mast were chosen to maximize efficiency, eliminate ventilation, and make the mast responsive and fast. As you can see from the video at the top of this page, the V2 slashes hard, turns on a dime, pumps efficiently, and charges waves.

NoLimitz is the recreational arm of Innovative Composite Engineering, a firm that has been in business in White Salmon, WA, for over 30 years, primarily serving the aerospace industry with custom composite components. The NoLimitz V2 foil mast is the result of 30 years of composite experience. The V2 is very stiff, torsionally and in bending.

Torsional stiffness is very important for a foil mast because if the mast twists around like a noodle, the foil is going to wander where it wants to go, not where you want it to go. This leads to going into a turn and waiting for the foil to finally catch up with you, which usually happens with a surprising pop– the last thing you want during a bottom turn. That is why NoLimitz focuses as much on the torsional stiffness as the bending stiffness, to ensure the foil always tracks where you are telling it to.

Low Profile Hard Anodised Board Adapter

The board adapter was designed for optimal hydrodynamics, hence the curves. The V2 features no loose bolts - our board adapters are bonded to the carbon mast for life. Our board adapter is compatible with both M6 and M8 hardware. The board plates and fuselage connectors are CNC cut from solid aircraft-grade aluminium, then hard anodized for years of protection from corrosion and wear.

The design of our board adapter allows you to connect your board adapter as far forward as possible. For the V2, we’ve greatly improved the anodise of the board adapters and fuselage adapters. (THEY ARE BLACK)

Hydrofoil Masts

Naish s27 85cm alloy mast

No Limitz V2 Takuma 3 x M6 mast & Stringy adaptor

No Limitz V2 78cm mast & Code Adaptor

KT Foil Carbon Masts

KT Alloy Foil Masts

Takuma Kujira Alloy Mast 75cm

KT Apex UHM Carbon Mast

Takuma 85cm Mast Set Standard